$700 KALAMAZOO model 8-C-D METAL HORIZONTAL BAND SAW 1 phase 110 volt.
Large commercial metal shop cut off saw.
It has been sitting for quite some time and it does work.
The saw blade is old and worn so will need to be replaced.
You will need to add oil to or service the hydraulic ram.
The black covering on the electric cord has cracks from age.
$165 Husky adjustable weight distribution trailer hitch 10000 with bars and mounts
$165 Eaz Lift adjustable weight distribution trailer hitch 10000 with bars and mounts
$100 RV / TRAILER 3 STEP folding steps / stairs, 24 inch, folds up when not being used.
Hickory step made USA
$120 for a 3 Axis Welder / Welding Clamp, Heavy Duty Cast Iron Angle Clamp, metal working wood wooding crafting etc.
Top clamp can hinge up out of the way.
$30 for 2 wood clamps very long 9 feet 6 inches capacity.
$100 Milwaukee 18 volt cordless saw sawzall
40 Crain door jam undercut saw, for undercutting door jams etc prior to installing tile or wood flooring
$20 reese sway control mechanism for trailer includes one ball end.
$45 surge brake for trailer, Dico, says works 1 7/8 and 2 inch balls, 3 inch wide trailer mount.
Never used but has been in the garage.
$200 gooseneck to fifth wheel adapter 15 inch long, adapts 5th wheel trailer hitch to a goose neck hitch.
Good 2 go brand
$100 king pin extender 5th fifth wheel 10 inch The RV5 9649 adds 10″ of new clearance from king pin center to king pin center, giving you the extra clearance you need in a strong, easy to install accessory.
$325 5th fifth wheel hitch Curt E16 with Curt R16 round slider roller and 2 bed rails.
The R16 slider is great for short bed trucks allowing you to make sharp turns when needed.
$200 YALE 500 pound, 1/4 ton ELECTRIC HOIST.
Working good, 115 volt.
Chain is 10 feet.
$125 tree work pole climbing spikes gaffs set with belts.
$80 long gaffs spike for tree climbing work.
$25 long gaffs spike set for tree climbing work WITHOUT LEATHERS
$40 16d nails, grip rite 50 lb full box coated sinkers 16 d.
$30 shear notcher, thin sheet metal, adjustable width, 2 inch as pictured.
Notches thin angle sheet metal for making / bending 90's
more misc etc
5five96967582
Whatsapp
